橡胶接头
您的位置:橡胶接头 > 产品中心 > 橡胶接头 >

NG系列耐油避震喉|上海淞江液压耐油橡胶避震喉

责任编辑:耐酸碱橡胶接头 耐高温橡胶接头 耐油橡胶接头 发布时间:2016-04-16 15:36 浏览次数:

 上海淞江专业生产NG耐油橡胶接头避震喉,NG耐油橡胶接头主要用在进口的液压设备或者注塑机等设备上面。

  Two battles of Shanghai jiang NG oil resistant rubber compensator is mainly used in imported hydraulic equipment or devices such as injection molding.

  


上海橡胶接头,单球橡胶接头,双球橡胶接头,NG橡胶避震喉NG橡胶避震喉|上海淞江NG耐油避震喉,上海淞江NG耐油避震喉
上海橡胶接头,单球橡胶接头,双球橡胶接头,NG橡胶避震喉NG橡胶避震喉|上海淞江NG耐油避震喉,上海淞江NG耐油避震喉
上海橡胶接头,单球橡胶接头,双球橡胶接头,NG橡胶避震喉NG橡胶避震喉|上海淞江NG耐油避震喉,上海淞江NG耐油避震喉
上海橡胶接头,单球橡胶接头,双球橡胶接头,NG橡胶避震喉NG橡胶避震喉|上海淞江NG耐油避震喉,上海淞江NG耐油避震喉

NG橡胶避震喉NG橡胶避震喉|上海淞江NG耐油避震喉,上海淞江NG耐油避震喉

NG橡胶避震喉,NG耐油橡胶避震喉,上海淞江NG耐油避震喉

  NG耐油橡胶接头Compensator

  SAE法兰尺寸 1寸-5寸 SAE 1” to 5”

  

  NG耐油橡胶接头与可转动的SAE法兰弹性连接器。NG耐油橡胶接头是用于吸收阻尼振动,振动,噪声,补偿管道设备轴向和横向位移方向。

  Rubber compensators are elastic connectors with turnable SAE flanges. Compensators are used for damping oscillations, vibrations, noises and movements in axial and transversal direction.

  设计 Design

  NG耐油橡胶接头有一个表面硫化橡胶阀体(内部和外部)。外部橡胶耐腐蚀、耐磨损、耐老化。内部橡胶部分由nitril-butadien-caoutchouc(丁腈橡胶)做成,耐油性能良好。

  Rubber compensators have a plain surface vulcanized to a fabric body (inside and outside) of the rubber part. The outside is weather resistant and protects the fabric against ageing, wear and corrosion. The interior of the rubber part consists of nitril-butadien-caoutchouc (BUNA-N). Because compensators have tightening lips on both sides, further seals are not necessary.

  使用范围 Use

  所有矿物油产品,原油、润滑油、冷却油(-20°C到80°C,断断续续的100°C),油脂、冷水、温水60°C,水/油乳剂、燃料芳烃含量为30%。在吸入和返回线操作。

  For all mineral oil products, crude oil, lubrication oil, cooling oil (-20°C up to 80°C, intermittent 100°C), grease, co

  材料 Material

  内部 inside :丁腈橡胶/氯丁橡胶 NBR/CR

  外部 outside: 氯丁橡胶 CR

  法兰 flange:钢 steel

  工作压力 :Working Pressure

  大工作压力允许范围:0.2bar-1.5bar

  maximum working pressure 0,2 to 1,5 bar absolute

  安装前,请阅读手册NG耐油橡胶接头的大伸缩范围!注意,尺寸公差参照以上参数表。

  Please read manual before installation and for the maximum movement tolerances of the rubber connection! Note, that the dim

  

  

  

  以上关于NG橡胶接头|NG耐油橡胶接头|上海淞江NG耐油橡胶接头信息来源于上海橡胶软接头|上海弹簧减震器|上海金属软管.选上海淞江减震器制造有限公司,

分享到:
网站首页 |  网站地图 站点地图